We have manufactured more than 800 molds and testers in accordance with JIS and ISO, and delivered to the Japanese dental universities for practical training and research.
We will manufacture the molds and the testers for research based on the customers’ orders. Please contact us about the delivery date because most products are produced after an order is placed.

Thermal cycling (K178)

Reproduce the change in temperature of the oral cavity
Tester to verify the material variation by dipping in cold and hot water alternately

K178Thermal cycling

Power Supply AC100V 1.0kW
Cold Water Tank Temperature from 4℃ to room temperature
Hot Water Tank Temperature from room temperature to 60℃
Timer Each timer of cold and hot water tank can be set up minutes and hours from 0 to 10 hours.
Number of testing 1 to 99999 times
Size W×D×H 570 × 680 × 720
Weight Approx. 60kg

Impact and abrasion tester (K655)

Impact and abrasion tester (K655)

Reproduce the condition of oral occlusion
Tester to verify confliction of each dental materials by up-and-down collision (1.5kgf~5.5kgf) and left-and-right slide (2~6mm) in the water tank which is in-mouth temperature (from room temperature to 60℃)

Power Supply AC100V 1.5kW
Air Pressure 0.69Mpa~0.78pa
Collision load 1.5kgf~5.5kgf
Left-to-right slide 2~6mm
Water temperature From room temperature to 60℃
Number of tests Collision 1 to 999999 times
Left-to-right slide 1 to 999999 times
Collision + Left-to-right slide 1 to 999999 times
Test positions Up to 4 positions

Abrasion tester (K236)

Abrasion tester (K236)

Power Supply AC100V 0.5kw
Left-to-right slide 5mm, 10mm, 30mm
Number of tests 1 to 999999 times

Mold for measuring narrow line reproducibility (K202)

Mold for measuring narrow line reproducibility (K202)

Comparatively tests the impression accuracy of impression materials.
ISO1564,6873 JIST6505,T6512,T6513

Can be produced the exact accuracy of mold for reproducibility.

It is the exact reproduction, produced by a special technique from a master mold of high accuracy.

Highly reliability of data comparison.

FC-R3 (K100)

FC-R3 (K100)

Mold for training or research for making full-cast crown.
Mold for verifying compatibility the crown after waxed-up casting.

Expansion measuring instrument (JIS) (K38)

JIS T6604
JIS T4405
Tester to measure the expansion of plaster how it is varied based on the plaster types and/or powder-water ratio